New Wedge Wire Filter for filtration of bitumen

Contec® Develops New Wedge Wire Filter (metal edge filter)

Contec® is a leading manufacturer of filtration systems, oil mist separators and liquid level measuring technology. It has recently developed a filtration system for the production of cold self-adhesive vapour barrier sheets for large roofs with bitumen for Rasco.

The filtration challenge:

As a subsidiary of a leading international supplier of construction adhesives, Rasco GmbH in Augustdorf, Germany produces cold gluing thin bitumen sheets for roof areas of more than 2,500m² with a thickness of approximately 0.3mm. Because of the required low coat thickness problems in production are unavoidable. Polymer bitumen at 140°C is applied with a layer thickness of = 0.3mm on a plastic laminated carrier sheet.

To avoid malfunctions during the production process, it is necessary to filter the hot polymer bitumen composition. However, due to the high viscosity of the material with decreasing temperature, disassembly and maintenance of the filter are possible only at full working temperature.

The solution:

The hot bitumen compound is filtered through a newly developed wedge wire filter by CONTEC with hinged lid and internal clutch. In addition, the filter is equipped with a heating jacket through which it can be integrated into the existing factory thermal oil plant. By this construction a tool-free removal of the filter element is possible at full working temperature.

The filter holds back the clumping reliably, so that production takes place smoothly and trouble-free.


Printed on 2017-12-14